Warning Livedoc is no longer being updated and will be deprecated shortly. Please refer to https://documentation.tjhsst.edu.

Difference between revisions of "Cobalt RAQ2 MIPS Cluster"

From Livedoc - The Documentation Repository
Jump to: navigation, search
Line 16: Line 16:
* Processor: MIPS@250Mhz
* Processor: MIPS@250Mhz
* Memory: 143MB
* Memory: 143MB
* Hard Drive: None
* Hard Drive: 4GB IDE
* Interface: Ethernet interface & serial
* Interface: Ethernet interface & serial

Revision as of 11:22, 1 September 2008

Rear of the cluster, 4/21/2006


There are 22 Cobalt RAQ2 servers. They are named for letters of the Greek alphabet. They run from beta to psi.


They are currently being used only for display purposes. Jess Unger and Matt Green wrote scripts to display time (accurate to ten seconds) and weather on the LCD displays. RSS feeds are pending.


When the Cobalts are rebooted you MUST kill the process paneld on each machine before text can be written to the screens. Currently there is a script (/root/python/killer.sh) that will kill paneld on all the Cobalts. Then you can use the other scripts to add a message of your choice. The command to put something on the screen of a Cobalt (when logged in to the respective machine) is $ putlcd [line 1] [line 2]

If a Cobalt will not boot try net booting it. To net boot a Cobalt, press the left and right buttons on the D-Pad simultaneously when it turns on. It should then say "Net booting"

Tau is currently down at the moment and will not net boot. Please avoid shutting down any Cobalts until the problem is resolved since it might happen to another one if it is shut down.


  • Processor: MIPS@250Mhz
  • Memory: 143MB
  • Hard Drive: 4GB IDE
  • Interface: Ethernet interface & serial


  • Their IP addresses range from
  • Each has a 16x2 LCD display

External Links